New 6m3 AUSROAD Jetmaster Road Maintenance Units ready to leave AUSROAD SYSTEMS Workshop in Brisbane for Muswellbrook Shire Council, Muswellbrook, NSW and RMS (Roads & Maritime Services), Broken Hill NSW.
Each truck has been customised to suit Customers specific requirements, two days training for operators will take place on site for each truck.
A few years ago, the answer to whether buying or hiring mining equipment in Australia might well have been to buy, because the mining industry was booming and capital was flowing. Now however, the decision is not so clear cut and many companies find that hiring is a better option for them than buying.
Let’s take a look at the reasons why some companies might find buying their mining equipment in Australia a better option, whilst others might find that hiring better suits their needs.
Reasons why buying mining equipment in Australia is the best option
Spending your capital on buying mining equipment is a good idea when there is plenty of work around. This is because you always have the right equipment ready to be deployed and don’t have to try and locate hire equipment, when you have multiple projects on the go at the same time. It is also of benefit to have your own trucks so that you can respond to new business opportunities as they become available, rather than having to wait on the delivery of hire trucks. In addition, mining equipment and heavy duty trucks are considered assets, so you when you purchase them they are helping to increase the positive side of your balance sheet.
Reasons why hiring mining equipment in Australia is the best option
When times are tough, it can be more beneficial to keep your capital in the bank, ready to take advantage of new business opportunities as they arise. When you hire your equipment, you don’t have to spend money on updating your fleet of trucks, on maintenance, registrations and insurances. So you can actually save a lot of money when you hire instead of buy your mining equipment. The problem with hiring is that you are at the mercy of the hire company, so you need to find a reliable company with a good reputation and one that has a large fleet of trucks on their books.
Another option that some companies prefer is to buy a core fleet of trucks and then hire other trucks, if and when the need arises. If you are in the market for new mining equipment in Australia, why not call Ausroad on 07 3216 7058 and discuss your options with us?
A stemming truck is used to backfill blast holes on mine sites and is a procedure that focuses the blast downwards and contains and minimizes the effect of the blast above ground. Without at least one stemming truck on-site, backfilling blast holes must be performed by manual labour and is a very time consuming, back-breaking and unsafe operation.
In today’s financial climate, mining operations need to do everything they can to increase efficiency and cut down on costs and these specialised trucks dramatically increase the speed and safety of filling blast holes on-site. Specifically, a stemming truck will result in the following eight significant benefits to the drilling and blasting cycle:
1.The speed and efficiency of stemming is significantly increased on-site.
2.Increased safety due to less movement on the drill platform.
3.Automated controls in the driver’s cab keeps employees safely away from the stemming process.
4.Reduced dust and exposure to the sun for employees during stemming.
5.Eliminates double handling of stemming materials.
6.Reduced wastage of stemming materials and minimal contamination during the procedure.
7.Accurate delivery of stemming material to each blast hole.
8.Accurate record of stemming material used during filling.
All of these benefits result in a safer working environment for employees and fewer problems with Workplace Health and Safety on-site, as well as more consistent and faster filling of blast holes. As you can imagine, in both the short and the long term, a stemming truck can significantly increase the productivity of a mining operation, resulting in faster ore extraction.
At Ausroad, we design and manufacture our trucks to work consistently and reliably in the harsh Australian outback, so our trucks are tough, low maintenance and highly efficient. In fact, our trucks have revolutionised the stemming process within open cut mining operations, resulting in considerable cost savings to companies and increased safety on-site for employees.
Our stemming trucks have the largest payload capacity in Australia and can deliver 26 tonnes of stemming within 15 minutes. For more information on our heavy duty trucks, call Ausroad on 07 3216 7058 and chat to us about hiring or purchasing our trucks.
At Ausroad, we design and manufacture three of the best-selling road maintenance machines in Australia. It is no secret that our HD trucks, Jetmaster trucks and our emulsion spray units are known throughout the world for being tough, top of the line trucks, able to function in the worst of environments.
All of our trucks are available for hire and we have been providing road maintenance machines to government organisations and private contractors for more than 25 years.
Why are Ausroad’s road maintenance machines the best hires in Australia?
There are many reasons why our road maintenance trucks are so popular. Mainly because you save a lot of money when you hire rather than buy, and you are not simply hiring a second rate, imported and badly designed truck. You are hiring the most up to date and the best designed modern trucks in Australia.
We sell our road maintenance machines all over the world, because people within the industry know that our trucks can take a beating and keep on going, regardless of the temperature, weather and environment. Let’s take a look at some of the features of our best-selling road maintenance machines.
HD trucks: Our Horizontal Discharge Units (HD Series) are designed to deliver asphalt or quarry products. They are suitable for a variety of road maintenance tasks, such as pot hole filling, patch compaction and other heavy maintenance, depending on the optional extras you require.
Jetmaster trucks: Our Jetmaster road maintenance trucks are customised with a selection of equipment, suitable for a variety of tasks, from repairing broken edges, pot holes, edge breaks, depressions and speed bumps.
Emulsion spray units: These self-contained road maintenance machines come with a selection of different outlets including a spray wand, spray bar and crack filling device. They can be either skid or trailer mounted and are ideal for small road maintenance jobs.
As you can see, Ausroad road maintenance machines are a step above the rest, so if you are in the market to hire some seriously tough road maintenance trucks, then call us on 07 3216 7058 and let’s get you started.
At Ausroad, we sell and hire out our Jetmaster trucks, HD trucks and emulsion spray units to private companies who have usually won contracts for road maintenance or even to local councils themselves. If you are a business owner or manager in the industry, you are well aware that whenever a company requires road maintenance trucks, there is always the question of should you buy or hire?
In today’s financial climate many people might think that it is a good idea to hire their road maintenance trucks, so let’s take a closer look at 8 of the advantages of hiring, instead of buying your trucks.
1. Supplement your core fleet: If you know that you only need a certain road maintenance truck for a short period of time to finish a job, it makes complete sense to hire rather than buy.
2. No maintenance: You save money on services and maintenance, as we deal with all of that for you and all you need to do is complete your job.
3. No transport needed: We deliver all of our trucks anywhere in Australia, so you save money on transport costs as well.
4. No registrations or insurances: Part of the costs in owning these large trucks are the costly registrations and insurances. We pay all of these for you when you hire from us, so you save even more money.
5. No extra storage needed: When you no longer need to use the road maintenance trucks, you don’t have to store them in your storage facilities or yard, because we simply pick them up from you at the end of the hire.
6. Free up your capital: With the downturn in the economy, every dollar counts and having the cash on hand to grow your business is much better than tying it up in trucks parked in the yard.
7. Reduce your liabilities: When you purchase road maintenance trucks they are classed as liabilities and reduce your ability to borrow money from the banks.
8. Modern trucks: All of our road maintenance trucks are top of the line with all the bells and whistles that increase efficiency and reduce time on the road. When you buy your trucks, you are stuck with that model forever.
Call Ausroad on 07 3216 7058 and let’s talk about how hiring our road maintenance trucks can help your business save money.
Road maintenance services make a crucial contribution to the economic growth and development of a region, as well as providing important social benefits. A reliable and well maintained road system offers access to businesses, health, employment and education, all of which stimulate the economy and social development in an area.
Despite the initial investment in roads, over time, this infrastructure becomes damaged and deteriorates, requiring not only ongoing road maintenance services to maintain the existing roads, but also new investments to improve and expand the system. Without this ongoing maintenance and expansion, roads will continue to deteriorate, requiring significant repairs or even replacement after just a few years.
A lack of road maintenance services in an area ultimately results in a failing transport system, soaring costs and a significant financial cost to the local economy and population. Specifically, insufficient road maintenance leads to reduced service delivery and decreased safety on the roads.
Reduced service delivery: Any growing community relies on service delivery, which means that goods and products are delivered to business in the local area, whilst other goods are transported away from the area and across the country or overseas. A lack of road maintenance services puts this economic process in jeopardy, reducing profits to local businesses, increasing unemployment and eventually leading to businesses closing and moving away from the area.
Decreased safety: Ongoing road maintenance services are vital to the safety of all road users, including the public, as well as truck drivers who deliver the majority of our goods and produce around Australia. Failing road maintenance not only puts lives at risk and brings tragedy to many families and local communities, but it also increases the burden on the hospital system, which may need to provide long term care for victims of road traffic accidents.
Road transport is the major avenue for the movement of people, goods and produce around the country and when the system fails, because of insufficient road maintenance services, there are both long and short term ramifications for the community.
A failing infrastructure is not an option, the only solution is to continue investing in road maintenance services for the good of the community and the local economy. For more information on Australian road maintenance trucks, call Ausroad on 3216 7058.
Locating the best mining equipment in Australia is vital to the ongoing success of your business. No-one wants to invest their capital in equipment that constantly breaks down, which frequently happens when equipment is not designed for the harsh conditions prevalent in the Australian outback.
At Ausroad, we are known throughout the world for designing and manufacturing the very best and the toughest mining equipment in Australia. We ship our trucks all around the world, because if they can withstand the outback, they can take anything else that is thrown at them.
Why are Ausroad mining trucks the best?
We have been designing mining trucks since 1990 and during this time we have learnt what makes a truck tough, safe and low maintenance. We are not re-sellers, we actually design all of our trucks from the ground up and we know that we design the best mining equipment in Australia.
We continually research better ways to design and manufacture our trucks, so that we are always on the cutting edge of technology, giving our customers the very latest and the best designed mining equipment in Australia. We don’t sit in a room bending over a computer, instead we are out in the trenches talking to mining personnel, finding out what they want in their trucks and how we can design better trucks for the worker in the mines.
Since speed is not our only priority, we have also designed our trucks to be safer as well. With the entire stemming process automated from the cab, the operator can remain in a safe environment, whilst filling holes with precision and accuracy.
At Ausroad, we are the leading designers of mining equipment in Australia and the innovative design of our stemming trucks means that they have the largest capacity in the world. This means that stemming is completed much faster with our trucks, saving you both time and money that can be better utilised in other areas of your business.
If you are in the market for top of the range and reliable mining equipment in Australia, that is designed to be tough, low maintenance and safe, then you cannot do better than calling us at Ausroad on 07 3316 7058 and don’t forget to ask us for a free quote.
Without a doubt, when Australian mining companies need tough trucks for their open pit mines, the first place they call is Ausroad. Their trucks are extremely popular, because they are built to withstand the harsh outback climate, are solidly built, require little maintenance, hardly ever break down and can be completely customised to your needs.
Let’s take a deeper look at what makes Ausroad such a globally recognised company and why they are so popular with Australian mining companies.
1. Reputation: Ausroad have an enviable reputation of designing and manufacturing some of the best trucks in the world. Australian mining companies need trucks that can stand up to just about the worst conditions on the planet and they know that Ausroad’s trucks always deliver the goods.
2. Custom trucks: Most Australian mining companies need their trucks customised to suit their specific requirements. Ausroad can give you exactly what you want, because they design and manufacture their trucks and they are not resellers like so many other companies. When you want a tough, custom truck there is no other choice but to call Ausroad.
3. Excellent customer service: Ausroad’s customer service is unparalleled. They go out of their way to give you exactly what you need, to answer all of your questions and are always there on the end of the line when you need help or advice.
4. Full training and support: Ausroad’s commitment to their customers doesn’t stop with their superb customer service. In the unlikely event that something goes wrong, Ausroad have fitters and maintenance personnel on call ready and waiting to fix your problems. You also have full training and backup support, expert technical help is always available and they even deliver the trucks to your site. Now you can see why Australian mining companies keep Ausroad on speed dial.
5. Purchase or hire: You can either purchase or hire their trucks, so whatever your budget or length of contract you can always benefit from Ausroad’s top of the line fleet of modern trucks.
Australian mining companies make a bee line for Ausroad, so if you need tough, solidly built trucks with full automation, a high level of safety and all the bells and whistles, then your only option is to call Ausroad on 07 3216 7058 and start moving your business forward.
If you are in the market for custom mining trucks, then it is important to select a company with a solid reputation. It is also best to deal directly with a company that actually designs and manufactures the trucks, rather than going through a reseller.
Ausroad have a global reputation for designing and manufacturing a range of trucks that are tough, low maintenance and efficient. All of their trucks can be tailored to their customer’s specific needs and their trucks are purpose built to withstand the harsh climatic conditions of the Australian outback. This means that these custom mining trucks are really tough, top of the line and built with the latest technology.
Ausroad manufacture three different types of custom mining trucks: Stemming trucks, Stemming contour loaders and Water trucks.
-Stemming trucks: With the largest payload in Australia, these custom mining trucks have revolutionalised the stemming process around the world. These trucks deliver 26 tonne loads of stemming material in 15 minutes, saving you both time and money on site. Ausroad don’t stint with their designs and with safety as a major factor in open cut mines, they have created a truck that can be fully automated from the cab. This means that the driver no longer has to be outside and in a potentially hazardous situation, as all stemming can be controlled automatically from the driver’s cab.
-Stemming contour loaders: These purpose built, radio controlled (they are ride-on as well), track-based custom mining loaders are designed specifically to make stemming on uneven surfaces a breeze. These loaders can go where the larger stemming trucks can’t go and make stemming on hilly or contoured surfaces both safe and easy. The rubber tracks grip the ground well and with the staged inclinometers that warm of excessive operating angles, stemming is achieved in double quick time.
-Water trucks: Everyone needs a solid water truck, as these are the work horses of open pit mines. Ausroad’s water trucks are renowned for being low maintenance and very reliable with minimal downtime.
You can’t go wrong with Ausroad’s custom mining trucks, so call them on 07 3216 7058 and find out how their range of trucks can make your work day safer and faster.
Ausroad are one of the leading designers and manufacturers of stemming mining trucks in Australia. Their reputation for high quality, low maintenance and extremely safe equipment is flawless. Their trucks are designed to work in the hard tough conditions of Australia’s outback and have become very popular throughout the world where tough trucks are needed in harsh environments.
So let’s take a look at 5 key features of Ausroad’s stemming mining trucks and why that have become the backbone of mining companies across the world.
1. Minimal downtime: Ausroad design all of their trucks and equipment to be low maintenance, requiring the least amount of downtime possible. Their stemming mining trucks are designed to be high quality and tough, able to withstand high temperatures and dusty conditions, prevalent in the Australian outback.
2. Faster and safer stemming: Ausroad’s stemming mining trucks have the largest payload capacity in Australia and along with a priority on automation, results in faster and safer stemming. One truck can easily deliver 26 tonnes of stemming within 15 minutes and the process is fully controlled from the driver’s seat, increasing safety by reducing the time that the drivers are moving around the vehicle.
3. Fewer vehicle movements on site: With a faster payload and proportional hydraulic controls, the placement of stemming material is more accurate, increasing efficiency and reducing the number of unexpected vehicle movements on site. This results in reduced wear and tear on the stemming mining trucks and safety is increased on-site as well.
4. Less dust and heat exposure: The high level of automation means that the drivers can remain comfortably in the cab, controlling the stemming operations without leaving the cab. This results in less exposure to the harsh environment, which is characteristic of most open cut mines, and minimizes any health problems associated with prolonged exposure to heat and dust.
5. No double handling of stemming: Once the stemming material is loaded on to the stemming mining truck, the driver no longer needs to double handle this material as the entire operation is now automated from the driver’s cab. This saves both time and money on-site, reducing the stemming time and increasing operational efficiency.
If you are in the market to hire or purchase tough stemming mining trucks, then you can’t go wrong with calling Ausroad on 07 3216 7058 for a free quote.
When you are considering using some of your hard earned capitol and purchasing road maintenance machines, you need to make sure that you are dealing with the right company. You want to look for a manufacturer, rather than a reseller and you also want the company to have a well-regarded reputation in the industry. Other things to look for are low maintenance road maintenance machines, as well as on-site delivery, and training and support.
Reputation in the industry
When you are spending so much money on road maintenance machines, you want to be sure you are dealing with an established designer and manufacturer and not some fly by night who might disappear next year. Ausroad are one of the best regarded manufacturers of road maintenance vehicles in Australia and have built a solid reputation for their honesty, their reliability and their high quality designs.
All of the Ausroad road maintenance machines are designed specifically to be low maintenance, saving you both time and money. For example, their Jetmaster trucks are designed to work at optimum efficiency and do not require cleaning, oiling or dismantling at the end of the day. These design enhancements make a huge difference to the amount of time that is needed every day just to maintain these type of heavy duty trucks.
Training and support
Purchasing these road maintenance machines isn’t just like buying a new car, where you can hop in and drive away. That is why Ausroad have fitters and maintenance personal on call and why they provide full training and backup support. They even have expert technical support available and a dedicated national maintenance manager. All of this means that your employees will be fully trained in the use of these road maintenance machines (at no cost to you), and you have full technical and service support whenever you need their help.
Ausroad even go one step further by delivering your road maintenance machines anywhere in Australia. Without a doubt, Ausroad really do provide a high quality product and a first class service to their customers. Call them on 07 3216 7058 and get your workers back on the road fast.
Ausroad are the leading manufacturers of mining equipment in Australia and we have a large range of mining equipment for hire. We build our trucks tough, so they are low maintenance and can withstand the harsh Australian outback.
Our most popular hires have to be our top of the line stemming trucks, so let’s take a look at the specifications we offer and why the Ausroad stemming trucks are the best in Australia.
Mining equipment hire – the Ausroad stemming truck
When you are in the market for mining equipment in Australia, you want the best trucks you can find at the best prices. We not only have the best stemming trucks, but we also have the best stemming contour loaders as well and we can deliver anywhere in Australia.
Mining equipment hire has never been so easy, because we also have fitters and maintenance personnel on call and give you full training and backup support for dry hires (we have wet hires as well). Our fleet of stemming trucks includes 11 to 16 cubic meter hoppers with side or rear conveyors, full calibration and dust suppression.
Stemming trucks: When you hire our stemming trucks you have an IFM Canbus control system, giving you complete in cab control of all functions (belt feed, side shift, dust suppression, delivery volume and rear conveyor). You have a left or right side conveyor, a variable displacement hydraulic pump, (complaint with MD G41), a hydraulic oil cooler, a 1000 to 3400 litre water tank and a 29 litre/min dust suppression system.
Your stemming truck also comes with LED tail lights (high and low mounted), floodlights for night time operation, LED beacons, emergency stop buttons, wheel chocks, fire extinguishers, a hydraulic hopper hatch and a CAT jump start connection. These stemming trucks are the toughest mining equipment in Australia.
Stemming contour loaders: Our contour loaders are a track based unit that is remote controlled, but also has ride on options. It has a 1.5 tonne capacity, meets all mine specifications, is simple and easy to operate and is perfect for stemming on hilly or contoured surfaces.
So if you are in the market for mining equipment hire, call Ausroad on 07 3216 7058 and we will have you up and running in no time at all.
When you are looking for an emulsion sprayer for sale, you need to know whether you want a trailer or a skid mounted unit. Ausroad are the leading manufacturers of emulsion sprayers, so if your business is ready to look for an emulsion sprayer for sale in Australia, let’s take a look at the advantages of a trailer mounted versus a skid mounted unit.
Advantages of a trailer mounted emulsion sprayer for sale
When you are searching for an emulsion sprayer for sale, our trailer mounted units are ideal – they are capable of holding between 500 litres to 2,000 litres, are powered by a heavy duty petrol engine with a 3 cylinder cast-iron air compressor and have a 40 litre air receiver and a 40 litre kerosene tank.
The trailer fittings include a 2 to 3 tonne ATM steel tandem axle trailer with a trailer suspension kit, spare wheel, 205R16 eight ply tyres, LED side and tail lights, a 50mm hitch and a 7 pin round trailer plug (which can be customised), emergency break away chains and a swing away landing leg that can be removed. These units are tough, low maintenance and are easy to operate.
Advantages of a skid mounted emulsion sprayer for sale
Our skid mounted emulsion sprayers are fully mobile, standalone units that are designed to be lifted with a forklift from three sides and can be mounted on trucks or on a forklift’s bucket. These units are ideal for small to medium sized jobs and are built to comply with the Australian Standard AS 1210.
These units are powered by a pull start petrol engine with a 2 cylinder cast iron air compressor and come with a 40 litre kerosene tank for line flushing. You also have a 40 litre air receiver, a powder coated frame, a 10 meter steel retractable hose and an emulsion wand with spray nozzle, so you can use either a hand spray bar or a foldaway spray bar.
At Ausroad we can customise any of our units specifically for your business, so if you are searching for an emulsion sprayer for sale in Australia, call us on 07 3216 7058 and we can discuss your requirements.
If you are in the market for mining equipment in Australia, you need to decide whether to hire or buy the equipment for your mining plant. This is a big decision and making the wrong decision at this point can have ongoing repercussions. So let’s look at the pros and cons of buying mining equipment versus hiring the same equipment.
Pros and cons of buying mining plant equipment
The decision to buy your mining equipment is really going to be based on the state of the resources market at the moment and whether you want to sink your hard earned capital into equipment.
CONS: When you buy mining equipment, you are tying up capital that could be put to better use expanding your business or taking advantage of other opportunities that come your way. This is because this type of equipment requires a large monetary investment and you have to register, insure, repair and maintain these massive vehicles.
PROS: The advantage of purchasing your mining equipment in Australia is that you can have it customised to your specific needs. You can also buy the equipment whenever your business demands increase, because you don’t have to wait in line for to hire equipment that is limited in number.
Pros and cons of hiring mining plant equipment
With the resources market at a low point, you might be better off financially in hiring your equipment, so let’s look at the pros and cons of hiring versus buying.
CONS: When you hire equipment, you can’t always find what you need at the right time, which means that your contracts run late and you lose money. Sometimes, particularly in busy periods, the right equipment simply isn’t available for hire, so your profits take a beating and you have to lay people off.
PROS: When you hire your mining plant equipment, you can forecast your budget much easier because you simply add the monthly hire costs to your budget. You also save your capital, so if another opportunity comes along you can hop on board and expand your business, taking advantage of other revenue streams.
Regardless of whether you decide to hire or buy, always be sure to contact a company with a reputation for designing and manufacturing robust and reliable mining equipment in Australia.
Mining equipment hire is a hot topic right now, because of the continued downturn in the resources market. With the price of iron ore continuing to plummet, mining maintenance contractors are trying to squeeze every dollar out of their business. So you can see why many people might think that hiring equipment is a much better deal right now, than buying.
There are however, some very good reasons why purchasing might be a better financial decision for mining maintenance contractors. So let’s take a look at the advantages and disadvantages of hiring versus buying.
Mining equipment hire versus purchasing
The problem with buying mining equipment is that you have to invest a large amount of your capital into these assets, which depreciate over time and need repairing and maintaining as well. Of course, if you sell your business in the future, then all of your equipment will be considered assets and will increase the value of your business, but you have to spend your capital to buy them in the first place.
When you purchase mining equipment however, you not only have additional assets for your business, but you can also have them customised to your exact specifications. You also don’t have to wait in line for hire equipment to become available, but you can be on top of any job that comes along immediately. This means that you can outbid other contractors and increase your revenue with new contracts, because you have the ability to fulfil these contracts today.
In the current financial climate however, many mining maintenance contractors are holding onto their capital, and waiting for other opportunities to come along, so they expand their business. With money in the bank, it is easier to invest in other opportunities or even branch out into a sideline business to increase your overall revenue.
This is why mining equipment hire has increased in popularity, but there are also some downsides to hiring instead of buying your equipment. The big problem is that you might not be able to hire the equipment when you need it, so you might lose contracts because you just can’t service them on time.
Whichever decision you make, mining maintenance contractors always make sure that they only deal with a reliable Australian company.
Without a doubt, Australian road maintenance covers some of the most rugged country in the world, so we need trucks that are tough and can stand the rigors of the outback.
This is where Ausroad comes to the fore, because their road maintenance equipment is designed and built for the harsh Australian outback, so it can stand up to just about anything. It doesn’t matter where you work or in which country, it is a safe bet that the Ausroad trucks can rise to the occasion and do the job, time and time again.
So if you are in the market for some new road maintenance machines, here are 3 Ausroad designs that are considered to be the best in the world.
All of the Ausroad Jetmaster trucks can be customised to suit your specific requirements. They are designed for road maintenance in Australia, for example repairing broken edges and sealed road surface damage, as well as filling pot holes, depressions, wheel path ruts, crack sealing and digouts.
These trucks do not require dismantling at the end of the day, they don’t need oiling, they can be cleaned by sending water through them while running and come with a three year warranty.
These road maintenance machines deliver hot mix asphalt, cold mix premix asphalts, aggregate, crushed base and quarry products and can be customised to suit your needs. Use them for filling pot holes, for patch compaction or general maintenance repairs. They are low maintenance with a high quality construction and are built to last.
You can customise a HD truck to have an optional emulsion unit or opt for a stand-alone emulsion unit. All emulsion systems are built to Australian Standards, fitted with double pads and stress relieved to Class 2B for transportable vehicles.
The self-contained emulsion units are custom built to your specifications and come with various outlets, for example a spray wand, a crack filling device and a spray bar. They are suitable to be skid or trailer mounted and are easy to operate and low maintenance.
So if you are looking for the best designed and the toughest road maintenance machines in the world – call Ausroad on 07 3216 7058 today.
Ausroad builds tough, specialist road maintenance trucks designed specifically to work in harsh environments, to be low maintenance and to exceed Australian Standards. Providing road maintenance solutions is vital to your business, so you need the best people on your team to drive your business forward.
Without a doubt, if your business has been contracted to supply road maintenance services, then you need trucks and equipment that are built to last and use the latest technology, so you can stay ahead of your competitors.
This means that you need high quality, customised trucks, full training and backup support services, and the flexibility of purchasing or hiring your trucks and equipment.
High quality trucks customised to your needs
Ausroad’s trucks can be customised to suit the specific road maintenance services you provide, so you can always be sure of having the latest technology on hand. What you have is a road maintenance body fitted to a standard cab chassis, but with your modifications included. So you can chose between a HD truck and a Jetmaster truck, with optional additional equipment to suit your individual requirements and both come with a 3 year warranty.
Full training and backup support
When you hire road maintenance trucks from Ausroad, you can chose from their well-maintained fleet of high quality, modern trucks. So you don’t have to put up with older trucks that have seen better days, you have access to some of the best trucks in the world. You also have full training and backup, as well as fitters and maintenance personal on call if you need them at any time.
The flexibility of hiring your trucks
If you hire your trucks, this brings a whole new meaning to road maintenance solutions, because you can hang onto your capital and use it for other business opportunities, instead of tying it up in hard assets. It’s fair to say that the resources industry has taken a downturn, so having access to your capital in such a volatile market can mean the difference between the success or failure of your business in the future. So if you are in the market for some tough road maintenance trucks, call Ausroad on 07 3216 7058.
When you are looking for mining maintenance contractors in Australia, you can’t go wrong with Ausroad. These guys design and manufacture a range of trucks and loaders which are top quality, efficient and tough. Their trucks are designed specifically for the rough conditions involved in road maintenance in Australia, as well as on open cut mines.
So let’s take a look at some of their trucks and why they are so popular in Australia and around the world.
- Stemming trucks: Ausroad’s stemming trucks have revolutionalised the process of stemming, making it safer, more efficient and saving their clients lots of money. Their stemming trucks have the largest payload capacity in Australia, really fast hole filling and can deliver 26 tonnes in 15 minutes flat. Ausroad are without a doubt the best mining maintenance contractors in Australia.
- Stemming contour loaders: When you want a fast, zippy stemming truck you need to call Ausroad because their contour loaders are unique and the first of their kind in the world. You don’t need to worry about hilly, contoured surfaces anymore, because the rubber tracks and the perfect design of these units gives you maximum stability and all-terrain agility. It can even be radio-operated, keeping your drivers at a safe distance – serious toys for serious guys.
- Water trucks: Ausroad’s water trucks are reliable and robust and are used for road maintenance in Australia, as well as in open cut mines. With these superior designed trucks, your downtime due to maintenance or mechanical failure is massively reduced, because they are designed for the tough, hot outback conditions in Australia.
All of these trucks come with full mine specifications as standard and all of them can be customised to your needs. Ausroad has a fleet of stemming trucks and water trucks available for hire and can deliver them anywhere in Australia and even provide you with full training and backup support as well. You always have expert technical support available at all times, and dry and wet hire rates are also available.
So if you are searching for mining maintenance contractors in Australia, it will pay you to call Ausroad on 07 3216 7058 for a chat about your requirements.
When you are in the market for stemming trucks, water trucks or HD trucks you are always faced with the decision whether to buy them or hire them. So let’s look at the reasons why hiring these trucks is a good financial decision in the current market.
Hiring trucks doesn’t tie up your capital
Trucks cost a lot of money and in today’s financial climate with the resources market fluctuating up and down, it doesn’t make sense to sink a large amount of your capital in hard assets. Even worse, is if you take a loan out to pay for a stemming truck, then you have interest payments as well.
On the other hand, if you keep your capital on hand, you can take advantage of business opportunities as they come along and help to grow and expand your business.
Hiring trucks allows you to forecast your budget
When you hire water trucks for example, you always know the dollar amount of your hire charges every month and you can easily forecast your budget well into the future. However, if you take out a loan for the trucks, then you have to consider changes in interest rates over time, which can make forecasting your budget more difficult.
So if you use your capital to pay for the trucks, then you have used a massive chunk of your money, which reduces your capacity to move with the resources market and puts a negative spin on your budget.
Hiring trucks saves you money
When you hire HD trucks instead of buying them, you save a lot of money on interest rates over the life of the hire. You also save on registrations, insurances and maintenance. Don’t forget if you buy them, you have to fix them, but if you hire them – you get a new truck!
You also save money because you have the very best trucks available, which means that they are reliable, well maintained and efficient. With top quality trucks on site, you can work faster, on-site safety is increased, output is maximized and downtimes practically eliminated.
So if you want high quality, Australian made HD trucks, stemming trucks or water trucks, give Ausroad a call on 07 3216 7058.
Mining maintenance contractors need to stay on top of their game or else they could lose their valuable contracts to the competition. One of the easiest ways to stay at the top is to make sure that you always use the most reliable and the latest high-tech equipment that is available for road maintenance in Australia.
This is not easy, because you have to source the right companies, who can offer you the latest equipment for the right price. So let’s take a look at whether you should hire or purchase your road maintenance equipment in today’s financial climate.
Hiring equipment for road maintenance in Australia
When mining maintenance contractors hire equipment for road maintenance they don’t have to use their capital, because they only have monthly hiring costs. This means that you can expand your business and spend money on other areas that need attention without tying up your money in equipment.
You also don’t have the cost of maintaining the trucks or repairing them and you don’t have to register and insure them. Even more importantly, you can use the latest equipment and not have to pay top dollar to purchase them, because any good the hire company should have the most up to date equipment available for hire.
Buying equipment for road maintenance in Australia
As a mining maintenance contractor you need to have the latest equipment available at a moment’s notice to take advantage of any work that comes your way. So purchasing your own fleet of trucks and your own road maintenance equipment makes sense from a logistical point of view. When you own your equipment, you can deploy your operations team anywhere at any time without having to worry about arranging to hire trucks and equipment and then finding that what you need isn’t readily available.
So if you are in the market for the latest equipment for road maintenance in Australia, then if you are cutting costs, it is better to hire your trucks and equipment. On the other hand, if logistics are your top priority, then purchasing the latest equipment is the better option.
A new 15,000L Mack WaterCart was delivered to a Major Central Queensland Coal Mine and is our second WaterCart to be installed on this site. This Truck takes our Hire Fleet to a total of 19 vehicles all of which are hard at work in the Australian Open Cut mining sector.
A major Hunter Valley Coal operation has recently selected and taken delivery of a new 13m3 Ausroad Stemming Truck following an extensive cost benefit analysis of their stemming process. This Truck incorporates the latest stemming technology from Ausroad with the largest capacity Stemming Truck in Australia.
We have delivered a new stemming truck to a coal mine in central Queensland. The stemming truck on hire is a 13m3 Ausroad Stemming Truck (APS11) on a Scania G400 8×4 cab chassis. This Truck incorporates the latest stemming technology from Ausroad with the largest capacity Stemming Truck in Australia.
Ausroad is one of the leading manufacturers of mining and road maintenance equipment in Australia. Their purpose-built stemming trucks have the largest payload capacity in Australia and they are well known for maximising the efficiency and safety of stemming operations on-site.
Not only that, but if you are looking for an emulsion sprayer for sale, then you can’t go wrong with the Ausroad emulsion units, which are custom-built to your specifications.
Ausroad stemming trucks make short work of filling blast holes
When you are looking to buy or hire mining equipment, then Ausroad have everything you need. Their stemming trucks are designed specifically to maximise efficiency and safety on-site, in fact their designs have revolutionalised the stemming process. Just imagine delivering 26 tonnes of stemming in 15 minutes, with the entire process controlled from the cab.
Don’t forget that with the hydraulic controls the placement of the stemming material is spot on every time. This means that wastage is reduced, precision increased and the whole process is streamlined. They even have a brand new radio-controlled stemming truck that is built for uneven terrain with a 1.5 tonne capacity – how good is that!
Ausroad emulsion units are just about bullet proof
On the other hand, if you are in the market for road maintenance equipment and are searching for an emulsion sprayer for sale, then forget searching online and go straight to Ausroad. Their emulsion units are custom designed, low maintenance and easy to operate.
With up to a 2000 litre capacity, a 3 cylinder cast iron air compressor, a spray bar and wand, as well as a crack filling device, the Ausroad emulsion units make short work of road maintenance. They can be either skid or trailer mounted and they even have a mini spray pack with a 2 metre hand wand, which can be connected to a 1000 litre plastic pod if needed.
Ausroad also make water trucks, jetmaster trucks and HD trucks and you can hire or purchase any of their equipment – if you decide to hire, their fitters and maintenance people are on call to help out anytime. So whether you want mining equipment or you are looking for an emulsion sprayer for sale, check out Ausroad, the leading manufacturer of tough stuff in Australia.
Ausroad has two stemming trucks available for hire – one is the normal truck you are most probably used to seeing and the other is a new design, which is an Australian innovation and isn’t found anywhere else in the world. Let’s take a look at both of these stemming trucks:
The normal type of stemming truck
When you need to hire mining equipment in Australia, the leaders in the field are Ausroad, whose stemming trucks have the largest payload capacity in Australia. Their in-house design means that you can deliver 26 tonnes of stemming in an easy 15 minutes with the entire process controlled from the driver’s cab. This makes stemming blast holes a quick and efficient operation.
Another contribution to the time saving factor are the truck hydraulics, which make the stemming process much more precise, resulting in time saved and less wastage. All of this massively increases the efficiency in stemming blast holes, as well as the safety factor on site.
The new stemming contour loaders
The first in the world, this is a radio-controlled vehicle that makes stemming blast holes across uneven or hilly terrain an absolute breeze. The rubber tracks make this loader very agile and the radio controls keep the operator at a safe distance. This means that work is not constantly interrupted, because the truck needs to negotiate difficult terrain – the contour loader just shoots along and does its job in double quick time.
When you want to keep the job on time and supercharge your efficiency and safety, you can’t go past this radio-controlled contour stemming loader. As far as mining equipment in Australia goes, this has to be one of the best loaders you can hire – and one of the most fun to operate!
Of course, you can actually drive and operate the loader yourself, but then you lose all the fun of operating a radio controlled stemming truck! Don’t forget this has a 1.5 tonne capacity and is purpose designed for stemming blast holes on steep terrain, where it is unsafe for regular trucks to operate.
So if you are in the market to hire a stemming truck, give some serious thought to the new stemming contour loader from Ausroad.
At Ausroad we are pleased to announce that we now use green solar power to build all of our truck bodies. This means that from now on, all of our road maintenance trucks, stemming trucks and water trucks will be manufactured using our 30kw solar system with 140 solar panels on our workshop roof.
We can now run all of the power to our workshop and offices (including the air-conditioning) using solar power. We’re utilising state of the art software that allows us to check on the status of the power production and usage throughout the day.
The road to installing solar power
As far as we know, Ausroad is the only road maintenance , stemming truck and water truck manufacturer in Australia who can now claim that almost all of the energy used in their workshop operations comes from solar power.
This makes Ausroad a very eco-friendly company and we are proud of our accomplishment. It took us about six months from applying to Energex for approval of the system, through various quotes from suppliers, to selecting the suppliers and then onto the installation of the solar panels.
We calculate that within two-and-a-half to three years, this system will have paid for itself, which is a very short payback on such a large solar panel system. You will be pleased to know that so far, we are generating more electricity than we use every day, so we are producing well over 100% of our own power usage – it is great seeing our power meters running backwards!
What solar panel system did we install?
Green Solar (www.green-solar.com.au) in Brisbane installed the system using JinkoSolar panels and SMA inverters.
After significant research, we selected JinkoSolar, who are a global company with a corporate office here in Brisbane. They supply solar panels to both residential and commercial companies around the world and have a proven reputation for high quality products and services.
They offered us one of the best warranties on the market, which is backed by PowerGuard insurance, ensuring we can make warranty claims at any time for repairs and replacement parts.
As well as the solar panels from JinkoSolar we have two inverters – a 5kw and a 25kw inverter (SMA STP 5000TL and a SMA STP 25000TL) which are the best inverters you can buy. SMA are considered to be leaders in the global solar PV industry and their SMA STP 25000TL inverter is one of the most commonly used inverters for commercial enterprises.
So once again, we are happy to launch our 140 solar panels and you can rest assured that all of the vehicles will now be manufactured at Ausroad using good old Aussie sunshine.
The new Ausroad website was recently launched to make it easier for our customers to connect with us. If you have any feedback, please let us know.
Want to find out more or get a quote?Contact us today