Should I Buy or Hire Mining Equipment in Australia?

If you’re in the market for mining equipment in Australia, you need to decide whether to hire or buy the equipment for your mining plant. This is a big decision and making the wrong decision at this point can have ongoing repercussions. So let’s look at the pros and cons of buying mining equipment versus hiring the same equipment.

Pros and cons of buying mining plant equipment

The decision to buy your mining equipment is really going to be based on the state of the resources market at the moment and whether you want to sink your hard earned capital into equipment.

CONS: When you buy mining equipment, you are tying up capital that could be put to better use expanding your business or taking advantage of other opportunities that come your way. This is because this type of equipment requires a large monetary investment and you have to register, insure, repair and maintain these massive vehicles.

PROS: The advantage of purchasing your mining equipment in Australia is that you can have it customised to your specific needs. You can also buy the equipment whenever your business demands increase, because you don’t have to wait in line for to hire equipment that is limited in number.

Pros and cons of hiring mining plant equipment

With the resources market at a low point, you might be better off financially in hiring your equipment, so let’s look at the pros and cons of hiring versus buying.
 
CONS: When you hire equipment, you can’t always find what you need at the right time, which means that your contracts run late and you lose money. Sometimes, particularly in busy periods, the right equipment simply isn’t available for hire, so your profits take a beating and you have to lay people off.

PROS: When you hire your mining plant equipment, you can forecast your budget much easier because you simply add the monthly hire costs to your budget. You also save your capital, so if another opportunity comes along you can hop on board and expand your business, taking advantage of other revenue streams.

Regardless of whether you decide to hire or buy, always be sure to contact a company with a reputation for designing and manufacturing robust and reliable mining equipment in Australia.

Top 3 Road Maintenance Machines in the World

Without a doubt, Australian road maintenance covers some of the most rugged country in the world, so we need trucks that are tough and can stand the rigors of the outback.

This is where Ausroad comes to the fore, because their road maintenance equipment is designed and built for the harsh Australian outback, so it can stand up to just about anything. It doesn’t matter where you work or in which country, it is a safe bet that the Ausroad trucks can rise to the occasion and do the job, time and time again.

So if you are in the market for some new road maintenance machines, here are 3 Ausroad designs that are considered to be the best in the world.

Jetmaster trucks
All of the Ausroad Jetmaster trucks can be customised to suit your specific requirements. They are designed for road maintenance in Australia, for example repairing broken edges and sealed road surface damage, as well as filling pot holes, depressions, wheel path ruts, crack sealing and digouts.

These trucks do not require dismantling at the end of the day, they don’t need oiling, they can be cleaned by sending water through them while running and come with a three year warranty.

HD trucks
These road maintenance machines deliver hot mix asphalt, cold mix premix asphalts, aggregate, crushed base and quarry products and can be customised to suit your needs. Use them for filling pot holes, for patch compaction or general maintenance repairs. They are low maintenance with a high quality construction and are built to last.

Emulsion units
You can customise a HD truck to have an optional emulsion unit or opt for a stand-alone emulsion unit. All emulsion systems are built to Australian Standards, fitted with double pads and stress relieved to Class 2B for transportable vehicles.

The self-contained emulsion units are custom built to your specifications and come with various outlets, for example a spray wand, a crack filling device and a spray bar. They are suitable to be skid or trailer mounted and are easy to operate and low maintenance.

So if you are looking for the best designed and the toughest road maintenance machines in the world – call Ausroad on 07 3216 7058 today.

Ausroad Helps to Build Safer Roads

Ausroad builds tough, specialist road maintenance trucks designed specifically to work in harsh environments, to be low maintenance and to exceed Australian Standards. Providing road maintenance solutions is vital to your business, so you need the best people on your team to drive your business forward.

Without a doubt, if your business has been contracted to supply road maintenance services, then you need trucks and equipment that are built to last and use the latest technology, so you can stay ahead of your competitors.

This means that you need high quality, customised trucks, full training and backup support services, and the flexibility of purchasing or hiring your trucks and equipment.
 
High quality trucks customised to your needs
Ausroad’s trucks can be customised to suit the specific road maintenance services you provide, so you can always be sure of having the latest technology on hand. What you have is a road maintenance body fitted to a standard cab chassis, but with your modifications included. So you can chose between a HD truck and a Jetmaster truck, with optional additional equipment to suit your individual requirements and both come with a 3 year warranty.

Full training and backup support
When you hire road maintenance trucks from Ausroad, you can chose from their well-maintained fleet of high quality, modern trucks. So you don’t have to put up with older trucks that have seen better days, you have access to some of the best trucks in the world. You also have full training and backup, as well as fitters and maintenance personal on call if you need them at any time.

The flexibility of hiring your trucks

If you hire your trucks, this brings a whole new meaning to road maintenance solutions, because you can hang onto your capital and use it for other business opportunities, instead of tying it up in hard assets. It’s fair to say that the resources industry has taken a downturn, so having access to your capital in such a volatile market can mean the difference between the success or failure of your business in the future. So if you are in the market for some tough road maintenance trucks, call Ausroad on 07 3216 7058.

Who are the Top Mining Maintenance Contractors in Australia?

When you are looking for mining maintenance contractors in Australia, you can’t go wrong with Ausroad. These guys design and manufacture a range of trucks and loaders which are top quality, efficient and tough. Their trucks are designed specifically for the rough conditions involved in road maintenance in Australia, as well as on open cut mines.

So let’s take a look at some of their trucks and why they are so popular in Australia and around the world.

  • Stemming trucks: Ausroad’s stemming trucks have revolutionised the process of stemming, making it safer, more efficient and saving their clients lots of money. Their stemming trucks have the largest payload capacity in Australia, really fast hole filling and can deliver 26 tonnes in 15 minutes flat. Ausroad are without a doubt the best mining maintenance contractors in Australia.
  • Stemming contour loaders: When you want a fast, zippy stemming truck you need to call Ausroad because their contour loaders are unique and the first of their kind in the world. You don’t need to worry about hilly, contoured surfaces anymore, because the rubber tracks and the perfect design of these units gives you maximum stability and all-terrain agility. It can even be radio-operated, keeping your drivers at a safe distance – serious toys for serious guys.
  • Water trucks: Ausroad’s water trucks are reliable and robust and are used for road maintenance in Australia, as well as in open cut mines. With these superior designed trucks, your downtime due to maintenance or mechanical failure is massively reduced, because they are designed for the tough, hot outback conditions in Australia.

All of these trucks come with full mine specifications as standard and all of them can be customised to your needs. Ausroad has a fleet of stemming trucks and water trucks available for hire and can deliver them anywhere in Australia and even provide you with full training and backup support as well. You always have expert technical support available at all times, and dry and wet hire rates are also available.

So if you are searching for mining maintenance contractors in Australia, it will pay you to call Ausroad on 07 3216 7058 for a chat about your requirements.

3 Reasons to Hire Water Trucks, HD Trucks and Stemming Trucks

When you are in the market for stemming trucks, water trucks or HD trucks you are always faced with the decision whether to buy them or hire them. So let’s look at the reasons why hiring these trucks is a good financial decision in the current market.

Hiring trucks doesn’t tie up your capital

Trucks cost a lot of money and in today’s financial climate with the resources market fluctuating up and down, it doesn’t make sense to sink a large amount of your capital in hard assets. Even worse, is if you take a loan out to pay for a stemming truck, then you have interest payments as well.

On the other hand, if you keep your capital on hand, you can take advantage of business opportunities as they come along and help to grow and expand your business.

Hiring trucks allows you to forecast your budget

When you hire water trucks for example, you always know the dollar amount of your hire charges every month and you can easily forecast your budget well into the future. However, if you take out a loan for the trucks, then you have to consider changes in interest rates over time, which can make forecasting your budget more difficult.

So if you use your capital to pay for the trucks, then you have used a massive chunk of your money, which reduces your capacity to move with the resources market and puts a negative spin on your budget.

Hiring trucks saves you money

When you hire HD trucks instead of buying them, you save a lot of money on interest rates over the life of the hire. You also save on registrations, insurances and maintenance. Don’t forget if you buy them, you have to fix them, but if you hire them – you get a new truck!

You also save money because you have the very best trucks available, which means that they are reliable, well maintained and efficient. With top quality trucks on site, you can work faster, on-site safety is increased, output is maximized and downtimes practically eliminated.

So if you want high quality, Australian made HD trucks, stemming trucks or water trucks, give Ausroad a call on 07 3216 7058.

How To Get The Latest Equipment For Your Road Maintenance Company

Mining maintenance contractors need to stay on top of their game or else they could lose their valuable contracts to the competition. One of the easiest ways to stay at the top is to make sure that you always use the most reliable and the latest high-tech equipment that is available for road maintenance in Australia.

This is not easy, because you have to source the right companies, who can offer you the latest equipment for the right price. So let’s take a look at whether you should hire or purchase your road maintenance equipment in today’s financial climate.

Hiring equipment for road maintenance in Australia
When mining maintenance contractors hire equipment for road maintenance they don’t have to use their capital, because they only have monthly hiring costs. This means that you can expand your business and spend money on other areas that need attention without tying up your money in equipment.

You also don’t have the cost of maintaining the trucks or repairing them and you don’t have to register and insure them. Even more importantly, you can use the latest equipment and not have to pay top dollar to purchase them, because any good the hire company should have the most up to date equipment available for hire.

Buying equipment for road maintenance in Australia
As a mining maintenance contractor you need to have the latest equipment available at a moment’s notice to take advantage of any work that comes your way. So purchasing your own fleet of trucks and your own road maintenance equipment makes sense from a logistical point of view. When you own your equipment, you can deploy your operations team anywhere at any time without having to worry about arranging to hire trucks and equipment and then finding that what you need isn’t readily available.

So if you are in the market for the latest equipment for road maintenance in Australia, then if you are cutting costs, it is better to hire your trucks and equipment. On the other hand, if logistics are your top priority, then purchasing the latest equipment is the better option.

Ausroad Makes Tough, Purpose Built Road Maintenance and Mining Plant Equipment

Ausroad is one of the leading manufacturers of mining and road maintenance equipment in Australia. Their purpose-built stemming trucks have the largest payload capacity in Australia and they are well known for maximising the efficiency and safety of stemming operations on-site.

Not only that, but if you are looking for an emulsion sprayer for sale, then you can’t go wrong with the Ausroad emulsion units, which are custom-built to your specifications.

Ausroad stemming trucks make short work of filling blast holes

When you are looking to buy or hire mining equipment, then Ausroad have everything you need. Their stemming trucks are designed specifically to maximise efficiency and safety on-site, in fact their designs have revolutionalised the stemming process. Just imagine delivering 26 tonnes of stemming in 15 minutes, with the entire process controlled from the cab.

Don’t forget that with the hydraulic controls the placement of the stemming material is spot on every time. This means that wastage is reduced, precision increased and the whole process is streamlined. They even have a brand new radio-controlled stemming truck that is built for uneven terrain with a 1.5 tonne capacity – how good is that!

Ausroad emulsion units are just about bullet proof

On the other hand, if you are in the market for road maintenance equipment and are searching for an emulsion sprayer for sale, then forget searching online and go straight to Ausroad. Their emulsion units are custom designed, low maintenance and easy to operate.

With up to a 2000 litre capacity, a 3 cylinder cast iron air compressor, a spray bar and wand, as well as a crack filling device, the Ausroad emulsion units make short work of road maintenance. They can be either skid or trailer mounted and they even have a mini spray pack with a 2 metre hand wand, which can be connected to a 1000 litre plastic pod if needed.

Concluding thoughts

Ausroad also make water trucks, jetmaster trucks and HD trucks and you can hire or purchase any of their equipment – if you decide to hire, their fitters and maintenance people are on call to help out anytime. So whether you want mining equipment or you are looking for an emulsion sprayer for sale, check out Ausroad, the leading manufacturer of tough stuff in Australia.

Can I Hire Tools for Stemming Blast Holes?

Ausroad has two stemming trucks available for hire – one is the normal truck you are most probably used to seeing and the other is a new design, which is an Australian innovation and isn’t found anywhere else in the world. Let’s take a look at both of these stemming trucks:

The normal type of stemming truck

When you need to hire mining equipment in Australia, the leaders in the field are Ausroad, whose stemming trucks have the largest payload capacity in Australia. Their in-house design means that you can deliver 26 tonnes of stemming in an easy 15 minutes with the entire process controlled from the driver’s cab. This makes stemming blast holes a quick and efficient operation.

Another contribution to the time saving factor are the truck hydraulics, which make the stemming process much more precise, resulting in time saved and less wastage. All of this massively increases the efficiency in stemming blast holes, as well as the safety factor on site.

The new stemming contour loaders

The first in the world, this is a radio-controlled vehicle that makes stemming blast holes across uneven or hilly terrain an absolute breeze. The rubber tracks make this loader very agile and the radio controls keep the operator at a safe distance. This means that work is not constantly interrupted, because the truck needs to negotiate difficult terrain – the contour loader just shoots along and does its job in double quick time.

When you want to keep the job on time and supercharge your efficiency and safety, you can’t go past this radio-controlled contour stemming loader. As far as mining equipment in Australia goes, this has to be one of the best loaders you can hire – and one of the most fun to operate!

Of course, you can actually drive and operate the loader yourself, but then you lose all the fun of operating a radio controlled stemming truck! Don’t forget this has a 1.5 tonne capacity and is purpose designed for stemming blast holes on steep terrain, where it is unsafe for regular trucks to operate.

So if you are in the market to hire a stemming truck, give some serious thought to the new stemming contour loader from Ausroad.

More than twice the speed: Ausroad offers a better stemming solution

Challenge

A large mining and resources company was seeking to improve efficiency and safety by reducing manual handling during their stemming process. Their system involved much room for error. The previously used front-end loaders required multiple trips back and forth to stem holes. With explosives already loaded in holes awaiting stemming, and denotation cords extending from the collar of those holes, the excessive vehicle movements were increasing the risk of dangerous and expensive misfires. They needed a better way to get the job done.

Solution

We designed a purpose-built Stemming Truck to specifically meet the carrying capacity of the trucks this client already used. The truck significantly reduced the risk of misfire, as there were far fewer vehicle movements, more accurate control in stemming placement and consequently less chance of running over the detonating cords.

Result

According to statistics provided by this client, they can now successfully stem more than 40 holes with 26 tonnes of stemming within 15 minutes. Overall, this has resulted in 60 per cent less time spent completing each production area. Additionally, with fewer vehicle movements and manual handling, the safety of the process has vastly improved. Following the successful delivery of this client’s first, purpose-built Ausroad Stemming Truck, the client has since ordered an additional four trucks.